🗊Презентация Video wall controller spec

LCD Video Wall User Instruction

Function : Function : • Full hardware architecture，Without CPU and Operation system; • Start-upTime less than 6ms; • No risk of virus infection,good safety; • Integrated multi-channel video signal source types：Composite video, VGA, DVI, HDMI; • Composite video can loop out； • With USB updating interface, quick and simple update; • Embedded 3D Video Light separation circuit unit • Embedded 3D progressive normalization process and frame rate conversion circuit unit; • Embedded 3D digital signal noise reduction unit; • supports drive to 1920X1080 LCD screen; • RS232 Serial Remote Control; each unit support 1ch in and 1ch out ; • Can continue to work 24 hours a day; • Easy operation with controller software Features: • Support Frame compensation function Embedded Frame compensation function, can adjust all the picture to a window to display.

• Thermostatically controlled fan • Thermostatically controlled fan Embedded Thermostatically controlled fan,can adjust the fan's operation according to the actural temperature to make sure the long life of usage . • Word-Editing Function This special word-editing function,have single screen,splicing screen display,the Word size, Color,Play speed、Play/Stop and etc.function can be changed acording to your application. • Software updated automatically via USB With a USB Interface,You can update the software via USB.Only save the updated software to the USB and insert to the USB interface,After Re-AC,the controller will check the software and updated automatically.

System Connection（2X2）: System Connection（2X2）:

Part 2 : Intergrated Controller Interface

Part 3:Control Software Instruction Software Operating Environment Operation system: Windows 98/2000/ NT/XP/WIN7/ WIN8/WIN8.1/WIN10/Vista， Minimum CPU：Pentium 133Mhz RAM：128MB Graphics Card：Standard VGA，More than 256 color display mode Hard disk: 10M typical installation Serial communication port：Standard RS232 communication interface or compatible models. Other equipment: mouse The steps of running the software ： 1,Open the the power switch , the power LED is on : Green color ：system is on ; Orange ：system is standby 2,Find the software , click LCD_CONTROL.exe , Software login window appears:

3,Software Interface

Interface Config Interface Config Click " setting " -- "Interface " 1）User name:Set the title of operator interface name, you can change according to demand freedom 2）LCD unit：Select your screen splicing unit corresponding number，like 2x2,2x3,3x3 and etc. 3）Logo ：Set the Log in picture ,you can change freedom 4）after setting, click "Enter"

Matrix Setting Matrix Setting Click " Setting" --" Matrix " 1）Accoring to the Original Matrix setting ：AV Matrix 、VGA Matrix、DVI\HDMI Matrix 2）The matrix have to be compatible with our software protocal 3）Input channels, device address, command delay ,different set with different matrix command. 4）the matrix and monitor configuring relations can be changed when Configuring relations is manual 5）Linkage control、Rename matrix can be set freedom

Splicing Operation Splicing Operation 1、Make sure COM port already open，can check Status bar or shortcut function area " open/close COM" 2、Make sure the signal type according to the inputed equipment signal origin 3、If have matrix , then you need to click the Matrix Linkage with √ 4, Choose Splicing screen, take the following 6x6 video wall for example ,need to splice (2,2)-(4,4) area to a 3x3 big screen displayed .

5、Select the correct signal input type and Matrix input channel , like: VIDEO,001_AV matrix input channel 5、Select the correct signal input type and Matrix input channel , like: VIDEO,001_AV matrix input channel Click the singal origin "video ", then you will see the change accordingly 6、Clik" function " - " Splice" / " Single " 7、The system will be saved automatically for all your operation

Other Function Other Function • “ Function ” 1、Splice ,Single ：Quick set the video wall status 2、Auto-adjust ：On VGA Signal ，Auto adjust the image position,remove black-edged 3、Still-image：Can make the moving image static 4、Image-adjust：Only valid on the "Administrator " mode

(1),Subtitle Function (Word-editing) (1),Subtitle Function (Word-editing) ① Select one line to be showed the words , take the first line for example (3x3) ②Click "subtitle" ,if shows failed, then check the cable damaged or not ,if successful , then go to next step ③Set word : size ,speed, color, position and etc. ④Click 'open", there will be belt light words appears ⑤Can set single screen to show the words, but the whole video wall only show one word

⑥、Close-Comm：On the case of the correct set of Com port ,can click this to open/close Com ⑥、Close-Comm：On the case of the correct set of Com port ,can click this to open/close Com port quickly ⑦、Save Data: if the system cannot auto-save data, use this function to save ⑧、Version：show the version information on the buttom of the software ⑨、Power-on/Power-off：control the video wall standby or open/off situation Screen Ext- Function Click " Screen Ext-Function"

(2)Frame function (2)Frame function (3)Soft DIP Setting (Dial)

When the product is faulty, please turn off the power immediately,Please do not attempt to disassemble the unit for repair ,this may cause further damage to the product .According to the following steps to exclude .if still problem, pls contact us .It is not in our warranty area if the product is repaired by users personally

Work Temperature：-15℃-65℃ Work Temperature：-15℃-65℃ Work Humidity：Relative humidity less than 95% Power consumption：≤300W，Depends on the screen model and size Supply Voltage：95V AC-250V AC Composite video format：PAL、NTSC、SECAM Composite Video Peak：1Vp-p Control way：RS-232（RJ45） VGA input：WUXGA（1920*1080） DVI input ：WUXGA（1920*1080） Screen resolution support：WUXGA（1920*1080），Dual: 10bit Thermostatically controlled fan：Automatic control