🗊Презентация Manual UTH 05B

UTH-05B

TIPS FOR TIME SETTING AND TIMER USE MOTIONS MODE 1) SET TEMP: SHOWS THE PRESENT SET TEMP. 2) PRESENT TEMP : SHOWS THE PRESENT INNER TEMP SENSED BY SENSOR . 3) BAE SIGN: THE PRESENT TEMP DIVIDED INTO 8 STAGES (BASIC 10℃) IS SHOWN BY BAR. IN CASE OUTPUT IS ON, BAR SIGN GOES ON AND OFF IN SERIAL ORDER. 4) DAY SIGN: SHOWS THE PRESENT SET DAY OF THE WEEK. . 5) TIME SIGN: SHOWS THE RESERVED TIME (ON TIME), IF SET. 6) PRESENT TIME: SHOWS THE PRESENT TIME (IF THE PRESENT TIME IS BETWEEN PM 10:00 ~ AM 08:00, CONTROLLER ECONOMIZES POWER – DISPLAY WINDOW TURNS DARK; OTHER KEY MOTION MAKES THE WINDOW TURN LIGHT) KEY MODE ∨ , ∧ : FOR SETTING A FIXED TEMP, SET THE TEMP WITH UP / DOWN BUTTON. (TEMP SET WORKS BY TOUCHING THE KEYS ) Hour : USES FOR CHANGING THE PRESENT HOUR, TIMER SET, RESERVATION HOUR SET, ETC. (THE PRESENT TIME SET WORKS BY TOUCHING; FOR RESERVING TIME , USE RELEVANT MODE) Min : USES FOR CHANGING THE PRESENT MIN, TIMER SET, RESERVATION HOUR SET, ETC. (THE PRESENT TIME SET WORKS BY TOUCHING; FOR RESERVING TIME , USE RELEVANT MODE) Mode : USES FOR CHANGING MODE IT WORKS BY SELECTION; IF NO CHANGE IN KEY, IT TERMINATES AGAIN. IT MOVES IN THE ORDER OF CLEAR - SET – CHECK – CLOCK – TIMER ; IF NO CHANGE IN KEY FOR 3 SEC, IT WILL TERMINATE AUTOMATICALLY. Day : USES FOR DAY SET. THE PRESENT DAY DISPLAYS BY TOUCHING “DAY” KEY; IN CASE OF PUSHING ONCE AGAIN, THE NEXT DAY DISPLAYS. AFTER SELECTING A FIXED DAY, “DAY” KEY IS TERMINATED AUTOMATICALLY WITHOUT AN ADDITIONAL KEY OPERATION. Slt(select) : USES FOR TIMER SET OR RELEASE BY PUSHING SELECT KEY AFTER SET A DAY, HOUR AND TEMP, ALL CONTENTS ARE STORED. (CONFIRM KEY) Power : USES FOR CONTROLLER POWER ON / OFF. IN SELECT OFF, ALL DISPLAY WINDOW AND KEYS DO NOT WORK.

TIME SET AND BASIC MOTIONS TIME AND DAY SET PRESENT TIME SET : BY TOUCHING ‘HOUR’ OR ‘MIN’ BUTTON ON THE FRONT PANEL FOR ONE TIME, THE DAY & PRESENT TIME ON THE BOTTOM OF THE DISPLAY FLICKERS. FOR CHANGING HOUR, USE ‘HOUR’ BUTTON; FOR MIN, USE ‘MIN’ BUTTON. IN CASE OF PUSHING KEY CONTINUOUSLY, IT SPEEDS UP ‘HOUR’ CHANGE; IT CHANGES ‘MIN’ BY 10 MIN UNIT. (IF NO KEY CHANGE FOR 3 SEC, THE PRESENT DAY AND TIME IS SET, AND FLICKER IS TERMINATED) PRESENT DAY SET : BY TOUCHING ‘DAY’ BUTTON ON THE FRONT PANEL FOR ONE TIME, THE PRESENT DAY & PRESENT TIME ON THE BOTTOM OF THE DISPLAY FLICKERS. . BY TOUCHING KEY, THE NEXT DAY IS DISPLAYED ONE BY ONE IF NO KEY CHANGE FOR 3 SEC, FLICKER IS STOPPED AND THE DAY IS SET. BASIC MOTIONS BY PUSHING ∨ & ∧ KEYS FOR 3 SEC SIMULTANEOUSLY, ‘stn ‘ (START OF FUNCTION)‘IS DISPLAYED. BY PUSHING ∧ KEY IN THE STATE OF ‘stn’ DISPLAY, IN THE ORDER OF – SEn – tln - , DISPLAY IS ADVANCED. FOR FIXING A MENU, PUSH ∨ & ∧ KEYS SIMULTANEOUSLY . SEn MODE  = AS SENSOR MODE, SET TEMP FOLLOWING TO THE ORDER ON ( TABLE 1 ).             AFTER SETTING A TEMP, PUSH ∨ & ∧ KEYS SIMULTANEOUSLY. IN THE LAST STAGE, THE SET VALUE IS STORED WITH BUZZER SOUND ; AND THE SET TEMP WORKS. AFTER COMPLETING THE SET, FOR SETTING TEMP, SET WITH ∨ OR ∧ KEY. IF NO CHANGE IN KEY, THE PRESENT TEMP IS DISPLAYED AND WORKS AFTER 3 SEC.          

MODE SET AND CHANGE

TIMER MODE MOTION TIME

TIPS FOR TIME SET AND RESERVATION RESERVATION SET SELECT MODE KEY. BY PUSHING MODE KEYS IN THE ORDER OF CLEAR – SET – CHECK – CLOCK – TIMER , MENU IS SELECTED. FOR RESERVATION, PUSH SELECTION KEY WHEN SET MENU IS DISPLAYED. ON TIME SET IS DISPLAYED AND DAY IS DESIGNATED AS MONDAY; 88 : 88 FLICKERS ON THE TIME DISPLAY. THEN SET ON TEM AND SET TEMP WITH ‘HOUR’ AND ‘MIN’ KEY AND ‘TEMP SET ‘ KEY. AFTER FINISHING SET, PUSH SELECTION KEY FOR ADVANCING OFF TIME AGAIN. THE METHOD OF OFF TIME SET FOLLOWS THE SAME METHOD OF ON TIME SET. IT IS POSSIBLE TO SET ON/OF TIME FOR FIVE (5) TIMES A DAY AT MAX. IF SELECTING OTHER DAY, BY PUSHING ‘DAY’ KEY, THE DAY IS CHANGED TO “TUES” . AFTER SELECTING A DAY, SET ON/OFF TIME IN THE SAME METHOD (RESERVATION IS POSSIBLE FOR A WEEK). WHENEVER PUSHING ‘DAY’ KEY, THE NEXT DAY IS DISPLAYED. AFTER FINISHING RESERVATION, OFF AND ON THE POWER. RESERVATION CHECK SELECT MODE KEY. BY PUSHING MODE KEYS IN THE ORDER OF CLEAR – SET – CHECK – CLOCK – TIMER , MENU IS SELECTED. FOR RESERVATION CHECK, PUSH THE SELECTION KEY WHEN CHECK MENU IS DISPLAYED. THE DISPLAY OF ON TIME SET FLICKER AND SET TIME AND TEMP IS DISPLAYED. DAY IS DISPLAYED FROM ‘MON’. IF THERE IS NO RESERVATION ON THE DAY, “88:88” FLICKERS. IT IS POSSIBLE TO CHECK RESERVATION ACCORDING TO THE ORDER FROM ‘MON’ TO ‘SUN.’ IF WISHING TO CHECK THE THAT DAY, IT IS POSSIBLE TO CHECK IT AFTER SETTING A FIXED DAY USING ‘DAY’ KEY ON RESERVATION CHECK MODE.

FUNCTION SET EASY TIMER SELECT MODE KEY. BY PUSHING MODE KEYS IN THE ORDER OF CLEAR – SET – CHECK – CLOCK – TIMER , MENU IS SELECTED. IF SELECTING EASY TIMER, SET TIME USING ‘HOUR’ OR ‘MIN’ KEY WHEN TIMER MENU IS DISPLAYED. IT IS POSSIBLE TO SET THE TIME FROM 1 MIN TO 24 HOURS (MAX). AFTER SETTING THE WORKING TIME BY USING ‘HOUR’ OR ‘MIN’, IF THERE IS NO KEY OPERATION, SET TIME IS APPLIED AUTOMATICALLY AND WORKS ACCORDING TO COUNT DOWN. (‘HOUR’ KEY – CONSECUTIVE MOTION BY PUSHING LONGER; ‘MIN KEY’ –INCREASE EVERY 10 MIN UNIT BY PUSHING LONGER) BEFORE 10 SEC OF CLOSE, BUZZER SOUNDS FOR 3 TIMES AND AFTER 10 SEC OF CLOSE, THE POWER OF CONTROLLER IS OFF. (IN CASE THE POWER OF CONTROLLER IS OFF-ON , THE MOTION TIME IS CLEANED AND THE MOTION IS TERMINATED, TOO) LOCK FUNCTION BY PUSHING ‘SELECTION’ KEY + ‘TEMP SET DOWN’ KEY FOR 3 SEC SIMULTANEOUSLY, ALL MOTIONS OF KEY ARE LOCKED WITH “BEEP “ SOUND. FOR RELEASE, THE SAME METHOD IS USED. IN THE STATE OF LOCK, ANY KEYS DO NOT WORK AND THE KEY TOUCH DOES NOT MAKE ANY SOUND, EITHER. INITIALIZATION FUNCTION THIS IS THE FUNCTION OF MAKING ALL VALUES BE THE BASIC ONES SET BY THE FACTORY AUTOMATICALLY BY PUSHING THE POWER BUTTON FOR 10 SEC, ALL SET VALUES ARE INITIALIZED TO THE BASIC ONE S SET BY THE FACTORY. THIS IS FOR CORRECTING THE CHANGED VALUES CAUSED BY INEXPERIENCED OPERATION OR OUTER NOISE. WHILE USING TIMER MODE, IT WILL CHANGE TO THE TEMP SENSOR USE MODE BUT RESERVATION SET TIME AND DAY ARE NOT CHANGED. “ - - - - “ DISPLAY FLICKERS FOR 3 TIMES.

TROUBLESHOOTING SNAPPING TEMP SENSING SENSOR BASICALLY THE CONTROLLER IS ON/OFF ACCORDING TO THE INDOOR TEMP SENSING SENSOR. IF THE INDOOR TEMP SENSING SENSOR IS SNAPPED, THE FLOOR SENSOR TEMP VALUE IS APPLIED AUTOMATICALLY. IF THERE IS NO FLOOR SENSOR OR THE FLOOR SENOR IS SNAPPED TOO, THE ERROR OF ‘EO’ IS DISPLAYED AND THE OUTPUT IS OFF PROMPTLY. (SUCH ERROR IS HAPPENED DUE TO THE FAILURE OF SENSOR SENSING UNIT; SHORT OF SENSOR EXTENSION CABLE; ELECTRIC LEAKAGE FROM THE SPOT ATTACHING SENSOR . INSPECTION IS NECESSARY AND IN CASE OF TERMINATION, RETURN AUTOMATICALLY.) SHORT CIRCUIT OF TEMP SENSING SENSOR BASICALLY THE CONTROLLER IS ON/OF F ACCORDING TO THE INDOOR TEMP SENSING SENSOR.. IF THE INDOOR TEMP SENSING SENSOR IS SHORT, “ES” ERROR IS DISPLAYED AND POWER IS OFF. IF THE FLOOR SENSING TEMP SENOR IS SHORT, “ES” ERROR IS DISPLAYED , AND POWER IS OFF. (SUCH ERROR IS HAPPENED DUE TO THE FAILURE OF SENSOR SENSING UNIT; SHORT OF SENSOR EXTENSION CABLE; ELECTRIC LEAKAGE FROM THE SPOT ATTACHING SENSOR . INSPECTION IS NECESSARY AND IN CASE OF TERMINATION, RETURN AUTOMATICALLY.) OVERHEATING ERROR THIS HAPPENS WHEN FLOOR SENSOR SENSING TEMP IS HIGHER THAN OVERHEATING SET TEMP . “oHt” IS DISPLAYED AND THE OUTPUT IS OFF PROMPTLY. FOR MANUAL RETURN, OFF-ON THE POWER IN THE STATE THAT OVERHEATING ERROR IS TERMINATED. ( CHECK THE STATE OF OVERHEATING SENSOR; CONTROLLER RELAY MOTION; SNAPPING OF FLOOR TEMP SENSOR; SET TEMP VALUE)